<?xml version="1.0" encoding="UTF-8"?><!-- generator="WordPress/2.6.3" -->
<rss version="0.92">
<channel>
	<title>Everything Robotics.......and then some</title>
	<link>http://blog.everythingrobotics.com</link>
	<description>ramblings of a self confessed geek......</description>
	<lastBuildDate>Wed, 19 Nov 2008 05:30:48 +0000</lastBuildDate>
	<docs>http://backend.userland.com/rss092</docs>
	<language>en</language>
	
	<item>
		<title>Forums Back Online</title>
		<description><![CDATA[Thanks to everyone who notified me of the forums being offline, they are now back up and running :)  Sorry for any inconvenience.
]]></description>
		<link>http://blog.everythingrobotics.com/2008/11/12/forums-back-online/</link>
			</item>
	<item>
		<title>Come join the Darkside Skywalker&#8230;..The Switch from PIC to AVR</title>
		<description><![CDATA[I&#8217;ve been playing around with the Arduino Diecimila and the ATMEGA168 over the last couple of weeks to better familiarise myself with the AVR ATMega168 MCU, I&#8217;ve been using PICs on and off the last few years, but the decision was made to use the ATMEGA as the MCU of choice for the Strobit Triggr [...]]]></description>
		<link>http://blog.everythingrobotics.com/2008/07/15/come-join-the-darkside-skywalkerthe-switch-from-pic-to-avr/</link>
			</item>
	<item>
		<title>Strobit M8 by Jan Gentsch</title>
		<description><![CDATA[All the design files and software are now available online for Jan Gentschs M8 Triggr Implementation.

Files can be found here.
]]></description>
		<link>http://blog.everythingrobotics.com/2008/06/26/strobit-m08-by-jan-gentsch/</link>
			</item>
	<item>
		<title>RFM12B Bit Rates and Throughput</title>
		<description><![CDATA[
During the prototyping of the StrobIt Triggr, I found that I could only hit the maximum bit rate of approx 12000bps, this is a far cry from the reported 256Kbps, so what was I doing wrong?
 It appears that there are a couple of factors that affect the data rate, one is how you connect [...]]]></description>
		<link>http://blog.everythingrobotics.com/2008/06/23/rfm12b-bit-rates-and-throughput/</link>
			</item>
	<item>
		<title>Intronix LogiPort Logic Analyser</title>
		<description><![CDATA[Well my new tool, a LogicPort Logic analyser from http://www.pctestinstruments.com/index.htm, arrived last week whilst in the middle of our house move and I&#8217;ve been itching to try it out, well last night I made time to play with it.&#160; The result is, man I wish I had one of these beasts earlier.

I dug out my [...]]]></description>
		<link>http://blog.everythingrobotics.com/2008/06/19/intronix-logiport-logic-analyser/</link>
			</item>
	<item>
		<title>RFM12 Tutorial - Part2</title>
		<description><![CDATA[Part 2 - RFM12 Hardware Interface
In this next part of the RFM12 tutorials I&#8217;ll be covering the hardware interface, signal descriptions and how you go about hooking it up to the MCU of your choice.
&#160;

Packages
The RFM12 RF module comes in a couple of different packages, DIP and SMD, I&#8217;ll mainly be covering the DIP throughout [...]]]></description>
		<link>http://blog.everythingrobotics.com/2008/06/17/rfm12-tutorial-part2/</link>
			</item>
	<item>
		<title>StrobIt In the Wild</title>
		<description><![CDATA[
.flickr-photo { border: solid 2px #000000; }
.flickr-yourcomment { }
.flickr-frame { text-align: left; padding: 3px; }
.flickr-caption { font-size: 0.8em; margin-top: 0px; }


IMG_8198.JPG, originally uploaded by jgentsch.
The first StrobIt Triggr seen in the Wild!
Jan has made a neat and well packaged version of the StrobIt Triggr.  Based on the AtMega8 it runs from a single AA [...]]]></description>
		<link>http://blog.everythingrobotics.com/2008/05/08/strobit-in-the-wild-2/</link>
			</item>
	<item>
		<title>StrobIt Board</title>
		<description><![CDATA[
Ok I have finally had a little bit of time to work on things (will be short lived as I&#8217;ve just bought a house and moving in the next couple of weeks Aghh!!).
Things are getting very close to reality after many design changes, the very nearly final Strobit Trigger base board, aka a modified Ardiuno [...]]]></description>
		<link>http://blog.everythingrobotics.com/2008/05/05/strobit-board/</link>
			</item>
	<item>
		<title>RFM12 Forum</title>
		<description><![CDATA[Due to the number of requests for help in getting a link operation with the RFM12 tranceiver, I&#8217;ve set up a dedicated topic on the forums.  http://forums.everythingrobotics.com/index.php. Please post any cries for help there, that way no information is lost in the comments of my blog or my email inbox 
]]></description>
		<link>http://blog.everythingrobotics.com/2008/03/27/rfm12-forum/</link>
			</item>
	<item>
		<title>StrobIt Triggr Update</title>
		<description><![CDATA[I was surprised when I looked at my blog today how long ago my last post was, nearly a month ago&#8230;bugger where has the time gone - it&#8217;s nearly christmas again LOL!  Way overdue for an update I think.
Well I can tell you where the time has gone, mainly sourcing component suppliers and getting prices [...]]]></description>
		<link>http://blog.everythingrobotics.com/2008/03/04/strobit-triggr-update/</link>
			</item>
</channel>
</rss>

<!-- Dynamic Page Served (once) in 1.314 seconds -->
