Mon 23 Jun 2008
Posted by Stephen Eaton under Embedded, RF, RFM12B, Tutorials, rfm12
[2] Comments
During the prototyping of the StrobIt Triggr, I found that I could only hit the maximum bit rate of approx 12000bps, this is a far cry from the reported 256Kbps, so what was I doing wrong?
Tue 17 Jun 2008
Posted by Stephen Eaton under Embedded, RF, Tutorials, rfm12
[13] Comments
In this next part of the RFM12 tutorials I’ll be covering the hardware interface, signal descriptions and how you go about hooking it up to the MCU of your choice.
Tue 8 Jan 2008
Posted by Stephen Eaton under Embedded, PIC, RF, Tutorials, rfm12
[10] Comments
During the development of the StrobIt Open Trigger Project I’ve been using the HopeRF RFM12B Tranceiver as the RF module. The learning curve was fairly steep so I’ve decided to create a series of How-To articles so that others can easily get the module up and running fairly quickly for their project of choice. So far I’ve already slated these for use in a few other projects around the house, both robotics, home control and weather station related.
Strobist Hack-A-Day EDN Design Ideas